SO, LETS STARTOn the Check Measure Sheet write what room the blind is going in E.G Bedroom, Living, Dining and so on

Now look at the window front on, decide where to install the blind, on the face (architrave) or in the recess

If it’s on the face, then it’s not complicated.

If the blind is getting installed in the recess, then you need to see if there is enough room to install.

There should be at least 60mm opening to accommodate the blind in this position.

Look for window winders and window locks on the side of windows. There should be enough room for the fabric to move freely up and down. (It is RECOMMENDED to overroll OR (front roll) all recessed blinds)

You will need three measurements for the width and two for the drop.

Start to measure at the top side of the recess where the blind is going to be installed,

this is the most critical measurement of all. Then measure the middle then the bottom of the window recess, write down the smallest measurement in the width column

You need to be precise with this measurement and it should be in millimetres. Now measure the drop start from left side from top to bottom recess and write in the Drop column.

DO NOT MAKE ANY ALLOWANCES ON THE MEASURMENTS OUR FACTORY WILL MAKE ALL THE NECESSARY ALLOWANCES

Now that you have your measurements decide which side you want the chain control Left or Righ

Decide the colours of the brackets and chains.
Have you considered motorisation……
Ask us.

And that’s how easy it is……
if you are still having difficulty and not sure call us, we are happy to help

THANK YOU FOR PURCHASING YOUR NEW BLINDS AT ORDERBLINDS.COM.AU